Memory Auto-Establish Disable - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
The current state: Normal
The information displayed by this command includes Ethernet switch memory limit,
size of free memory, times of disconnection, times of reconnection, and the current
state.
The following table describes the fields of the command:
Table 5-2 Description on the fields of the display memory limit command
memory safety
memory limit
memory auto-establish enabled
Free Memory
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal

5.1.3 memory auto-establish disable

Syntax
memory auto-establish disable
View
System view
Parameter
None
Description
Use the memory auto-establish disable command to disable the automatic
restoration of routing protocol connection (even if the free memory recovers to a safety
value).
Field
Huawei Technologies Proprietary
5-3
Chapter 5 Route Capacity Configuration
Description
Safety value of the switch memory.
Lower limit of the switch memory.
Automatic connection restoration is
enabled (If automatic
restoration is disabled, "auto-establish
disabled" is displayed).
Size of the current free memory in bytes
The times of the disconnection of the
routing protocol is 0.
The times of reconnection of the routing
protocol is 0.
The current state is normal (If the current
state is emergent,
displayed).
Commands
connection
"Exigence" is