Display Ip Routing-Table Ip-Address - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Field
Age
Cost

1.1.3 display ip routing-table ip-address

Syntax
display ip routing-table ip-address [ mask ] [ longer-match ] [ verbose ]
View
Any view
NoAdvise
NotInstall
Reject
Retain
Static
Unicast
Time to live, in the format of hour/minute/second (hh:mm:ss).
Value of the cost
Huawei Technologies Proprietary
1-5
Chapter 1 Static Route Configuration
Description
The routing protocol does not
redistribute NoAdvise
when it redistributes routes
based on the policy.
Normally, the routing protocol
selects the route
highest preference
routing table, places it in its core
routing table, and redistributes
it. Although the NotInstall route
cannot be placed in the core
routing table, it is possibly that it
is selected and redistributed.
Unlike the normal routes, the
Reject route will discard the
packets that select it as their
route, and the router will send
ICMP unreachable message to
the source end. Reject route is
usually used for the network test
When the routes from the
routing table are deleted, the
routes with Retain flag will not
be deleted. Using this function
you can set Retain flag for some
static routes, so that they can
exist in the core routing table.
The route with Static flag will not
be cleared from the routing table
after you save it and reboot the
router. Generally, the static
route configured manually in the
router belongs to a Static route.
Unicast route
Commands
route
with the
from its