Tftp Source-Interface - Huawei Quidway S3900 series Command Manual

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Parameter
tftp-server: IP address or host name of the TFTP server to be connected to.
ip-address: IP address to be set as the source IP address.
get: Specifies to download a file from the TFTP server.
source-file: Name of the file to be downloaded.
dest-file: Name of the new file to be saved locally.
put: Specifies to upload a file to the TFTP server.
source-file-url: Path and name of the file to be uploaded.
dest-file: Name of the new file to be saved on the TFTP server.
Description
Use the tftp tftp-server source-ip command to connect to a TFTP server through the
specified source IP address, and perform download or upload operations. If the
specified source IP address does not exist, a prompt appears to show the command
fails to be executed.
Example
# Connect to the remote TFTP server whose IP address is 192.168.8.8 through the
source IP address 192.168.0.1, and download the file named 3900.bin from it.
<Quidway> tftp 192.168.8.8 source-ip 192.168.0.1 get 3900.bin

1.3.7 tftp source-interface

Syntax
tftp source-interface interface-type interface-number
undo tftp source-interface
View
System view
Parameter
interface-type: Type of the source interface.
interface-number: Number of the source interface.
Description
Use the tftp source-interface command to specify the source interface of a TFTP
client, so that the TFTP client always uses it to connect with a TFTP server. This
command will fail to be executed if the specified interface does not exist.
Huawei Technologies Proprietary
1-35
Chapter 1 FTP and TFTP