Display Igmp Interface - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Group Address
225.1.1.1
225.1.1.3
225.1.1.2
Table 5-1 Output description of the display igmp group command
Field
Group address
Last Reporter
Uptime
Expires

5.1.2 display igmp interface

Syntax
display igmp interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: VLAN interface type and VLAN interface number of
the router which are used to specify a VLAN interface. If this argument is not specified,
the information about all the VLAN interfaces where IGMP is running is displayed.
Description
Use the display igmp interface command to view the IGMP configuration and running
information on a VLAN interface.
Example
# View the IGMP configuration and running information of all VLAN interfaces.
<Quidway> display igmp interface
Vlan-interface1 (10.153.17.99):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in seconds): 120
Value of maximum query response time for IGMP(in seconds): 10
Value of robust count for IGMP: 2
Last Reporter
20.20.20.20
20.20.20.20
20.20.20.20
Multicast group address
The last host reporting to join in the multicast group
Time passed since multicast group is discovered (hh: mm: ss).
Specifies when the member will be removed from the multicast
group (hh: mm: ss).
Huawei Technologies Proprietary
5-2
Chapter 5 IGMP Configuration Commands
Uptime Expires
00:02:04 00:01:15
00:02:04 00:01:15
00:02:04 00:01:17
Description