Remotehelp - Huawei Quidway S3900 series Command Manual

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
# Terminate the FTP control connection and FTP data connection and quit to user view.
[ftp] quit
<Quidway>

1.2.26 remotehelp

Syntax
remotehelp [ protocol-command ]
View
FTP client view
Parameter
protocol-command: FTP protocol command.
Description
Use the remotehelp command to display the help information about an FTP protocol
command.
This command works only when the FTP server provides the help information about
FTP protocol commands.
Caution:
This command is always valid when a Quidway series switch operates as the FTP
server.
If you use other FTP server software, refer to related instructions to know whether it
provides help information about FTP protocol commands.
Example
# Enter FTP client view.
<Quidway> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
Huawei Technologies Proprietary
1-27
Chapter 1 FTP and TFTP