Igmp Enable - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Value of startup query interval for IGMP(in seconds): 15
Value of last member query interval for IGMP(in seconds): 1
Value of query timeout for IGMP version 1(in seconds): 400
Policy to accept IGMP reports: none
Querier for IGMP: 10.153.17.99 (this router)
IGMP group limit is 256
No IGMP group reported
Table 5-2 Description on the fields of the display igmp interface command
IGMP version
query interval
querier timeout
max query response time
robust count
startup query interval
last member query interval
query timeout
Policy to accept IGMP
reports
Querier for IGMP
IGMP group limit

5.1.3 igmp enable

Syntax
igmp enable
undo igmp enable
View
VLAN interface view
Field
IGMP version
Interval of general query
Timeout time of the querier
Maximum time of response to query
IGMP robust count, that is, the times of sending IGMP
group-specific query packets before the IGMP querier
receives the IGMP leave packet from the host
The startup interval of IGMP to send query packets
The interval of sending IGMP group-specific query
packets when the IGMP querier receives the IGMP
leave packets from the host
Query timeout in IGMP version 1
The filtering policy of the IGMP multicast group to
control the access to IP multicast groups
IGMP querier
Limit on the number of IGMP groups added to the
VLAN interface. The router does not process new
IGMP packets when the number of IGMP packet
exceeds the limit
Huawei Technologies Proprietary
Chapter 5 IGMP Configuration Commands
Description
5-3