Sftp Client Configuration Commands; Bye - Huawei Quidway S3900 series Command Manual

Command Manual –SSH Terminal Service
Quidway S3900 Series Ethernet Switches-Release 1510
Parameter
Time-out-value: Timeout time. It is in the range of 1 to 35,791 (minutes) and defaults to
10 minutes.
Description
Use the sftp timeout command to set the timeout time for the SFTP user connection.
Use the undo sftp timeout command to restore the default timeout time.
After you set the timeout time for the SFTP user connection, the system will
automatically release the connection when the time is up.
Example
# Set the timeout time for the SFTP user connection to 500 minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] sftp timeout 500

1.4 SFTP Client Configuration Commands

1.4.1 bye

Syntax
bye
View
SFTP Client view
Parameter
None
Description
Use the bye command to terminate the connection to the remote SFTP server and
return to system view.
This command has the same function as the exit and quit commands.
Example
# Terminate the connection to the remote SFTP server (assume that the server IP
address is 10.1.1.2).
sftp-client> bye
Bye
[Quidway]
Huawei Technologies Proprietary
1-30
Chapter 1 SSH Terminal Service
Configuration Commands