Chapter 2 Common Ip Multicast Configuration Commands; Common Ip Multicast Configuration Commands; Display Multicast Forwarding-Table - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 2 Common IP Multicast Configuration

2.1 Common IP Multicast Configuration Commands

2.1.1 display multicast forwarding-table

Syntax
display multicast forwarding-table [ group-address [ mask { group-mask |
mask-length } ] | source-address [ mask { group-mask | mask-length } ] |
incominginterface { interfacetype interfacenumber ] register } ]*
View
Any view
Parameter
group-address: Multicast group address to specify a multicast group, in the range of
224.0.0.0 to 239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Specifies the incoming interface of multicast forwarding entries.
register: Registration VLAN interface of PIM-SM.
Description
Use the display multicast forwarding-table command to display the information
about multicast forwarding tables.
Related command: display multicast routing-table.
Example
# Query the information about the multicast forwarding table.
<Quidway> display multicast forwarding-table
Multicast Forwarding Cache Table
Total 1 entry: 0 entry created by IP, 1 entry created by protocol
00001. (10.0.0.4, 225.1.1.1), iif Vlan-interface2, 0 oifs,
Protocol Create
Matched 122 pkts(183000 bytes), Wrong If 0 pkts
Forwarded 122 pkts(183000 bytes)
Commands
Huawei Technologies Proprietary
2-1
Chapter 2 Common IP Multicast Configuration
Commands