Pim Neighbor-Limit; Pim Neighbor-Policy - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510

6.1.13 pim neighbor-limit

Syntax
pim neighbor-limit limit
undo pim neighbor-limit
View
VLAN interface view
Parameter
limit: Upper limit of PIM neighbors on the VLAN interface, in the range of 0~128.
Description
Use the pim neighbor-limit command to limit the number PIM neighbors on a router
interface. No neighbor can be added to the router any more when the limit is reached.
Use the undo pim neighbor-limit command to restore the default setting.
By default, the number of PIM neighbors on a VLAN interface is limited within 128.
If the number of existing PIM neighbors exceeds the configured limit, they will not be
deleted.
Example
# Limit the number of PIM neighbors on Vlan-interface10 within 50.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] multicast routing-enable
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] pim neighbor-limit 50

6.1.14 pim neighbor-policy

Syntax
pim neighbor-policy acl-number
undo pim neighbor-policy
View
VLAN interface view
Parameter
acl-number: Basic ACL number, in the range of 2000 to 2999.
Huawei Technologies Proprietary
6-13
Chapter 6 PIM Configuration Commands