Dldp Work-Mode - Huawei Quidway S3900 series Command Manual

Command Manual - DLDP
Quidway S3900 Series Ethernet Switches-Release 1510
undo dldp unidirectional-shutdown
View
System view
Parameter
auto: In this mode, when DLDP finds an unidirectional link or finds (in the enhanced
mode) that the peer port is down , it automatically disables the corresponding port.
manual: In this mode, when DLDP finds an unidirectional link or finds (in the enhanced
mode) that the peer port is down, instead of disabling the port automatically, it prompts
the user to disable the port manually and stops the DLDP packets sending/receiving on
the port at the same time.
Description
Use the dldp unidirectional-shutdown command to set the DLDP handling mode
when a unidirectional link is found.
Use the dldp unidirectional-shutdown command to restore the default setting.
By default, the operating mode of DLDP after unidirectional links are found is auto..
Related command: dldp work-mode.
Example
# Configure DLDP to automatically disable the corresponding port when a
unidirectional link is found.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dldp unidirectional-shutdown auto

1.1.7 dldp work-mode

Syntax
dldp work-mode { enhance | normal }
undo dldp work-mode
View
System view
Parameter
enhance: Configures DLDP to work in enhanced mode. In this mode, DLDP probes
actively whether neighbors exist when neighbor tables are aging.
Huawei Technologies Proprietary
1-6
Chapter 1 DLDP Configuration Commands