Put - Huawei Quidway S3900 series Command Manual

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
undo passive
View
FTP client view
Parameter
None
Description
Use the passive command to set the data transfer mode to the passive mode.
Use the undo passive command to set the data transfer mode to the active mode.
By default, the passive mode is adopted.
Example
# Enter FTP client view.
<Quidway> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Set the data transfer mode to the passive mode.
[ftp] passive
% Passive is on

1.2.23 put

Syntax
put localfile [ remotefile ]
View
FTP client view
Parameter
localfile: Name of a local file.
remotefile: File name which the local file is to be saved as.
Huawei Technologies Proprietary
1-24
Chapter 1 FTP and TFTP