Display Rip Interface - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the display rip command to display the current RIP operation state and RIP
configuration.
Example
# Display the current RIP operation state and configuration.
<Quidway> display rip
RIP is running
Checkzero is on
Summary is on
Traffic-share-across-interface is off
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Network :
202.38.168.0
Table 2-1 Description on the fields of the display rip command
RIP is running
Checkzero is on
Default cost : 1
Summary is on
Preference : 100
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Network :202.38.168.0
Traffic-share-across-interface is off

2.1.4 display rip interface

Syntax
display rip interface
Default cost : 1
Preference : 100
Field
Huawei Technologies Proprietary
2-3
Chapter 2 RIP Configuration Commands
Description
RIP is active.
Zero field checking is enabled.
The default route cost is 1
Routes are aggregated automatically
The preference of RIP is 100
Settings of the three timers of RIP
No destination address
transmission is specified
RIP is enabled on network segment
202.38.168.0
Traffic is shared across equivalent
routes.
of a