Traffic-Statistic - Huawei Quidway S3900 series Command Manual

Command Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
When the packets are redirected to CPU, they cannot be forwarded normally.
If the traffic is redirected to a down Combo port, the system automatically redirects
the traffic to the up port that is corresponding to the Combo port.
Example
# Redirect the packets which are received on Ethernet 1/0/1 and match the permit rule
in ACL 2000 to Ethernet1/0/7.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 1/0/1
[Quidway-Ethernet1/0/1] traffic-redirect inbound ip-group 2000 interface
Ethernet 1/0/7

1.1.20 traffic-statistic

Syntax
traffic-statistic inbound acl-rule
undo traffic-statistic inbound acl-rule
View
Ethernet port view
Parameter
inbound: Performs traffic statistic to the packets received by the interface.
outbound: Performs traffic statistic to the packets sent by the interface.
acl-rule: Applied ACL rules which can be the combination of various ACL rules. For the
ways of combining ACLs and the description on related parameters, refer to Table 1-5
and Table 1-6.
Description
Use the traffic-statistic command to activate the ACL to recognize and count the traffic
(whose action is permit).
Use the undo traffic-statistic command to cancel the traffic statistics.
Huawei Technologies Proprietary
1-21
Chapter 1 QoS Commands