Display Ospf Peer - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the display ospf nexthop command to display the OSPF next-hop information.
Example
# Display the OSPF next-hop information.
<Quidway> display ospf nexthop
Next hops:
Address
---------------------------------------------------------------
202.38.160.1
202.38.160.2
Table 3-9 Description on the fields of the display ospf nexthop command
Address
Type
Refcount
Intf Addr
Intf Name
nexthop

3.1.21 display ospf peer

Syntax
display ospf [ process-id ] peer [ brief | statistics ]
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes.
Description
Use the display ospf peer command to display the information about OSPF peer.
OSPF Process 1 with Router ID 1.1.1.1
Type Refcount
Direct 3
Neighbor 1
Field
Huawei Technologies Proprietary
Chapter 3 OSPF Configuration Commands
Intf Addr
202.38.160.1
202.38.160.1
Address of next hop
Type of next hop
Reference count of the next hop,
namely, number of routes using the next
hop
IP address of the interface to the next
hop
Interface to the next hop
Next hop
3-24
Intf Name
Vlan-interface2
Vlan-interface2
Description