Poe Mode - Huawei Quidway S3900 series Command Manual

Command Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510
View
Ethernet port view
Parameter
max-power: Maximum power distributed to the port, ranging from 1000 to 15400 in mW.
Description
Use the poe max-power command to configure the maximum power that can be
supplied by the current port.
Use the undo poe max-power command to restore the maximum power supplied by
the current port to the default value.
By default, the maximum power that a port can supply is 15400 mW.
Note that the unit of the power is mW and you can set the power in the granularity of
100 mW. The actual maximum power will be 5% larger than what you have set allowing
for the effect of transient peak power.
Example
# Set the maximum power supplied by current port.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 1/0/3
[Quidway-Ethernet1/0/3] poe max-power 15000
# Restore the default maximum power on the current port.
[Quidway-Ethernet1/0/3] undo poe max-power

1.1.8 poe mode

Syntax
poe mode { signal | spare }
undo poe mode
View
Ethernet port view
Parameter
signal: Supplies power through a signal cable.
spare: Supplies power through a spare cable.
Description
Use the poe mode command to configure the PoE mode on the current port.
Huawei Technologies Proprietary
1-9
Chapter 1 PoE Configuration Commands