Timer Response-Timeout - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Set the real-time accounting interval of the RADIUS scheme radius1 to 51 minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] timer realtime-accounting 51

1.2.31 timer response-timeout

Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Parameter
seconds: Response timeout time of RADIUS servers, ranging from 1 second to 10
seconds.
Description
Use the timer response-timeout command to set the response timeout time of
RADIUS servers.
Use the undo timer response-timeout command to restore the default response
timeout timer of RADIUS servers.
By default, the response timeout time of the RADIUS server is 3 seconds.
Note that:
If the switch gets no response from the RADIUS server after sending out a
RADIUS request (authentication/authorization request or accounting request)
and waiting for a time, it should retransmit the packet to ensure that the user can
obtain the RADIUS service. This wait time is called response timeout time of
RADIUS servers; and the timer in the switch system that is used to control this
time is called the response timeout timer of RADIUS servers. You can use the
timer response-timeout command to set the timeout time of this timer.
Appropriately setting the timeout time of this timer according to the network
situation can improve the performance of the system.
This command has the same effect with the timer command.
Related command: radius scheme and retry.
Huawei Technologies Proprietary
1-59
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands