Display Ospf Cumulative - Huawei Quidway S3900 series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Interface
Cost
State
Type
Priority
Designated Router
Backup
Router
Timers
Transmit Delay

3.1.16 display ospf cumulative

Syntax
display ospf [ process-id ] cumulative
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes .
Description
Use the display ospf cumulative command to display cumulative OSPF statistics.
Example
# Display cumulative OSPF statistics.
<Quidway> display ospf cumulative
OSPF Process 1 with Router ID 1.1.1.1
Cumulations
IO Statistics
Field
Name of interface belonging to this area
Cost of routes
State information
Network type of OSPF interface
Priority
IP address of designated router (DR)
Designated
IP address of backup designated router (BDR)
OSPF timers, defined as follows:
Hello
Dead
Poll
Retransmit
Delay time of transmitting LSA
Huawei Technologies Proprietary
Chapter 3 OSPF Configuration Commands
Description
Interval of hello packet
Interval of dead neighbors
Interval of poll
Interval of retransmitting LSA
3-15