Sftp Source-Interface - Huawei Quidway S3900 series Command Manual

Command Manual –SSH Terminal Service
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the sftp command to establish a connection to the SFTP server and enter SFTP
Client view.
Example
# Establish a connection to the SFTP server with IP address 10.1.1.2 and use the
default encryption algorithms.
[Quidway]sftp 192.168.0.65
Input Username: kk
Trying 192.168.0.65 ...
Press CTRL+K to abort
Connected to 192.168.0.65 ...
The Server is not authenticated. Do you continue access it?(Y/N):y
Do you want to save the server's public key?(Y/N):y
Enter password:
sftp-client>

1.4.19 sftp source-interface

Syntax
sftp source-interface interface-type interface-number
undo sftp source-interface
View
System view
Parameter
interface-type: Type of source interface, which can be LoopBack or Vlan-interface.
interface-number: Number of source interface.
Description
Use the sftp source-interface command to specify source interface for SFTP Client.
When the specified interface does not exist, the command prompts the configuration
fails.
Use the undo sftp source-interface command to remove the specified source
interface. Then the address of the device determined by the system is for the user to
access to the SFTP Server.
Huawei Technologies Proprietary
1-41
Chapter 1 SSH Terminal Service
Configuration Commands