Primary Authentication - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the primary accounting command to configure a primary HWTACACS
accounting server.
Use the undo primary accounting command to delete the configured primary
HWTACACS accounting server.
Note that:
You are not allowed to assign the same IP address to both primary and
secondary accounting servers; otherwise, unsuccessful operation is prompted.
If you repeatedly use this command, the latest configuration overwrites the
previous one.
You can remove an accounting server only when it is not being used by any
active TCP connections, and the removal impacts only packets forwarded
afterwards.
Example
# Configure a primary accounting server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs scheme test1
[Quidway-hwtacacs-test1] primary accounting 10.163.155.12 49

1.3.9 primary authentication

Syntax
primary authentication ip-address [ port ]
undo primary authentication
View
HWTACACS scheme view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
By default, the IP address of the primary authentication server is 0.0.0.0.
port: Port number of the server, which is in the range 1 to 65535 and defaults to 49.
Description
Use the primary authentication command to configure a primary HWTACACS
authentication server.
Use the undo primary authentication command to delete the configured
authentication server.
Huawei Technologies Proprietary
1-68
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands