Huawei Quidway S3900 series Command Manual page 194

Command Manual – Link Aggregation
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the display link-aggregation summary command to display summary
information of all aggregation groups, including device ID of the local end, aggregation
group ID, aggregation group type, device ID of the remote end, number of the selected
ports, number of the unselected ports, load sharing type and master port number.
Example
# Display summary information of all aggregation groups.
<Quidway> display link-aggregation summary
Aggregation Group Type:D -- Dynamic, S -- Static , M -- Manual
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor ID: 0x8000, 00e0-fc00-5104
AL AL
ID Type
--------------------------------------------------------------------------
1 S
2 M
Table 1-2 Description on the fields of the display link-aggregation summary
command
Field
Aggregation
Group Type
Actor ID
AL ID
AL Type
Partner ID
Select Ports
Unselect Ports
Share Type
Partner ID
0x8000,0000-0000-0000 0
none
Aggregation group type
Local device ID
Aggregation group ID
Aggregation group type: D (dynamic), S (static), or M (manual)
ID of the remote device, including the system priority and
system MAC address of the remote device (in the dynamic or
static aggregation group, if the LACP protocol is disabled on
the remote port of the logical master port, the partner ID
displays 0x8000,0000-0000-0000 )
Number of the selected ports
Number of the unselected ports
Load sharing
(non-load-sharing)
Huawei Technologies Proprietary
Chapter 1 Link Aggregation Configuration
Select Unselect Share Master
Ports Ports Type Port
1 NonS Ethernet1/0/2
0 1 NonS Ethernet1/0/3
Description
type: Shar (load-sharing),
1-3
Commands
or NonS