Mirroring-Group - Huawei Quidway S3900 series Command Manual

Command Manual – Mirroring
Quidway S3900 Series Ethernet Switches-Release 1510
ip-group acl-number: ACL number of the basic or advanced ACL, ranging from 2000 to
3999.
link-group acl-number: ACL number of the Layer 2 ACL, ranging from 4000 to 4999.
user-group acl-number: ACL number of the user-defined ACL, ranging from 5000 to
5999.
rule rule-id: Rule number of the ACL rule, ranging from 0 to 65534. If this parameter is
not specified, all rules in the specified ACL will be applied.
monitor-interface: Mirrors traffics to the monitored interface.
cpu: Mirrors the data traffics to the CPU.
Description
Use the mirrored-to command to reference ACLs for identifying traffics and perform
traffic mirroring for packets that match.
Use the undo mirrored-to command to remove traffic mirroring configuration.
This command applies to the rules whose actions are permit in matching the specified
ACL.
LACP and TCP must be disabled on the destination port. Traffic mirroring does not
support aggregated synchronization and configuration copy.
Mirroring configuration takes effect only after a source port and a destination port are
specified.
Related command: display qos-interface mirrored-to, monitor-port
Example
# Mirror packets that match ACL 2000 on port GigabitEthernet1/1/1 to
GigabitEthernet1/1/4 through traffic mirroring.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface GigabitEthernet1/1/4
[Quidway-GigabitEthernet1/1/4] monitor-port
[Quidway-GigabitEthernet1/1/4] quit
[Quidway] interface GigabitEthernet1/1/1
[Quidway-GigabitEthernet1/1/1]
monitor-interface

1.1.4 mirroring-group

Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
mirrored-to
Huawei Technologies Proprietary
1-4
Chapter 1 Mirroring Commands
inbound ip-group 2000