Poe-Profile - Huawei Quidway S3900 series Command Manual

Command Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Description
Use the display poe-profile command to display detailed configuration information of
the created PoE profile for a switch.
Example
# Display detailed configuration information for the PoE profile by the name of
profile-test.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] display poe-profile name profile-test

2.1.3 poe-profile

Syntax
poe-profile profilename
undo poe-profile profilename
View
System view
Parameter
profilename: Name of PoE profile, a string with 1 to 15 characters. It starts with a letter
from a to z or from A to Z, and it cannot be any of reserved keywords like all, interface,
user, undo, and mode.
Description
Use the poe-profile command to create a PoE profile.
Use the undo poe-profile command to delete an existing PoE profile.
The following PoE features can be configured in the PoE profile mode:
poe enable
poe mode { signal | spare }
poe priority { critical | high | low }
poe max-power max-power
The maximum number of PoE profiles that can be configured for an S3900 switch is
100.
Example
# Create a PoE profile by the name of profile-test.
<Quidway> system-view
Huawei Technologies Proprietary
2-3
Chapter 2 PoE Profile Configuration Comma
nds