Accounting-On Enable - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
View
RADIUS scheme view
Parameter
None
Description
Use the accounting optional command to open the accounting-optional switch.
Use the undo accounting optional command to close the accounting-optional
switch so that users are charged forcibly.
By default, once an ISP domain is created, the accounting-optional switch is closed.
Note that:
When the system charges an online user but it does not find any available
RADIUS accounting server or fails to communicate with any RADIUS accounting
server, the user can continue the access to network resources if the accounting
optional command has been used; otherwise, the user is disconnected from the
system. The accounting optional command is often used in the cases that only
authentication is needed and no accounting is needed.
After the accounting optional command is used for a RADIUS scheme, the
system will no longer send real-time accounting update packets and
stop-accounting packets for any user who adopts the RADIUS scheme.
This configuration takes effect only on the accounting using this RADIUS
scheme.
Example
# Execute the accounting-optional command for the RADIUS scheme radius1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] accounting optional

1.2.2 accounting-on enable

Syntax
accounting-on enable [ send times | interval interval ]
undo accounting-on { enable | send | interval }
View
RADIUS scheme view
Huawei Technologies Proprietary
1-28
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands