Radius Scheme - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510

1.2.16 radius scheme

Syntax
radius scheme radius-scheme-name
undo radius scheme radius-scheme-name
View
System view
Parameter
radius-scheme-name: Name of the RADIUS scheme, a character string of up to 32
characters.
Description
Use the radius scheme command to create a RADIUS scheme and enter its view.
Use the undo radius scheme command to delete the specified RADIUS scheme.
By default, a RADIUS scheme named "system" has already been created in the
system.
Note that:
All the attributes of the RADIUS scheme "system" take the default values, which
you can see by using the display radius scheme command.
The RADIUS protocol configuration is performed on a RADIUS scheme basis.
For each RADIUS scheme, you should specify at least the IP addresses and
UDP port numbers of the RADIUS authentication/authorization and accounting
servers, and the parameters required for the RADIUS client to interact with the
RADIUS servers. You should first create a RADIUS scheme and enter its view
before performing other RADIUS protocol configurations.
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
The undo radius scheme command cannot be used to delete the default
RADIUS scheme. In addition, you are not allowed to delete a RADIUS scheme
which is being used by an online user.
Related
realtime-accounting, stop-accounting-buffer enable, retry stop-accounting,
server-type, state, user-name-format, retry, display radius scheme and display
radius statistics.
Example
# Create a RADIUS scheme named radius1 and enter its view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
command:
key,
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
retry realtime-accounting,
1-45
Configuration Commands
scheme, timer