Local-User Password-Display-Mode - Huawei Quidway S3900 series Command Manual

Command Manual - File System Management
Quidway S5100-EI Series Ethernet Switches-Release 1510
undo local-user { user-name | all [ service-type { telnet | ftp | lan-access | ssh |
terminal } ] }
View
System view
Parameter
user-name: Local user name, a character string of no more than 80 characters. This
string cannot contain the following characters: /:*?<>. It can contain no more than one
"@" character; the pure user name (the part before "@", that is, the user ID) cannot be
longer than 55 characters. The user name is case-insensitive; that is, the system
considers UserA and usera you input as the same user.
service-type: Specifies a user type. You can specify one of the following user types:
telent, ftp, lan-access (this type of users are mainly Ethernet access users, for
example, 802.1x users), ssh, and terminal (this type of users can use terminal service,
that is, the users can log into the switch through Console port, AUX port, or
Asynchronous serial port).
all: Specifies all users.
Description
Use the local-user command to add a local user and enter local user view.
Use the undo local-user command to delete the specified local user(s).
Example
# Add a local user named hello1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] local-user hello1
New local user added.
[Quidway-luser-hello1]

2.1.3 local-user password-display-mode

Syntax
local-user password-display-mode { auto | cipher-force }
undo local-user password-display-mode
View
System view
Huawei Technologies Proprietary
2-2
Chapter 2 FTP/TFTP Lighting Configuration
Commands