Huawei Quidway S3900 series Command Manual page 362

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Display brief OSPF information.
<Quidway> display ospf brief
OSPF Process 1 with Router ID 10.110.95.189
RouterID: 10.110.95.189
spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 1 Type: 2
SPF computation count: 16
Area Count: 1
Area 0.0.0.0:
Authtype: none
SPF scheduled: <>
Interface: 201.1.1.4 (Vlan-interface1)
Cost: 1 State: DR
Priority: 1
Designated Router: 201.1.1.4
Backup Designated Router: 201.1.1.3
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Table 3-3 Description on the fields of the display ospf brief command
RouterID
Border Router
spf-schedule-interval
Authtype
Routing preference
Default
parameters
SPF
count
Area Count
Nssa Area Count
SPF scheduled
OSPF Protocol Information
Border Router: Area AS
Nssa Area Count: 0
Flags: <>
Type: Broadcast
Field
Router ID of the router
Border routers for connection to the area, including
ASBRs and ABRs
Interval of SPF schedule
Authentication type of OSPF
Routing preference of OSPF. The internal route of OSPF
includes intra/inter area route, and its default routing
preference is 10, while that of the external route of OSPF
is 150 by default
ASE Default ASE parameters of OSPF, including metric, type
and tag
computation
SPF computation count since OSPF is enabled
Areas for connection to this router
Number of NSSA areas
SPF scheduled (flag)
Huawei Technologies Proprietary
Chapter 3 OSPF Configuration Commands
Description
3-14