Ndp Enable; Ndp Timer Aging - Huawei Quidway S3900 series Command Manual

Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510

1.1.2 ndp enable

Syntax
ndp enable [ interface port-list ]
undo ndp enable [ interface port-list ]
View
System view, Ethernet port view
Parameter
interface port-list: Specifies a list of ports. The list can contain consecutive or
separated ports, or the combination of the both. You need to provide the port-list
argument in the form of interface-type interface-number [ to interface-type
interface-number ] &<1-10>, where interface-type specifies the port type, and
interface-number specifies the port number (in the form of slot number/port number).to:
Specifies a port range. &<1-10> means that you can provide up to ten port indexes/port
index ranges for this argument.
Description
Use the ndp enable command to enable NDP globally or on a port.
Use the undo ndp enable command to disable NDP globally or on a port.
When the ndp enable command is executed in system view, the NDP feature is
enabled globally if the port-list argument is not specified, while the NDP feature is
enabled on the specified port if the port-list argument is specified. When the ndp
enable command is executed in Ethernet port view, the NDP parameters cannot be
entered and the NDP feature can be enabled on the current port only.
By default, NDP is enabled both globally and on an Ethernet port.
Note that the NDP feature on a port does not take effect until the NDP feature is
enabled globally.
Example
# Enable NDP globally.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ndp enable

1.1.3 ndp timer aging

Syntax
ndp timer aging aging-in-secs
Huawei Technologies Proprietary
1-4
Chapter 1 HGMPv2 Configuration Commands