Local-User - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
authentication, the commands they can access are determined by the levels sets
on the user interfaces.
Related command: local-user.
Example
# Set the level of user1 to 3.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] local-user user1
New local user added.
[Quidway-luser-user1] level 3

1.1.14 local-user

Syntax
local-user user-name
undo local-user { user-name | all [ service-type { ftp | lan-access | ssh | telnet |
terminal } ] }
View
System view
Parameter
user-name: Name of the local user, a character string of up to 80 characters. This
string cannot contain the following characters: /:*?<>. It can contain no more than one
@ character. The pure user name (user ID, that is, the part before @) cannot be
longer than 55 characters, and the domain name (the part behind @) cannot be
longer than 24 characters. The local user name is case insensitive.
all: Specifies all local users.
service-type: Specifies the local users of the specified type. You can specify one of
the following user types: ftp, lan-access (generally, this type of users are Ethernet
access users, for example, 802.1x users), ssh, telnet, and terminal (this type of
users are terminal users who log into the switch through the Console port).
Description
Use the local-user command to add a local user and enter local user view.
Use the undo local-user command to delete one or more specified local users.
By default, there is no local user in the system.
Related command: display local-user and service-type.
Huawei Technologies Proprietary
1-16
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands