Build - Huawei Quidway S3900 series Command Manual

Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510
If a member is configured with a password different from the password of the
management device, it cannot be added to the cluster automatically.
Example
# Set up a cluster automatically.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] cluster
[Quidway-cluster] auto-build
Please input cluster name:aaa
Collecting candidate list, please wait...
Candidate list:
Name
Processing...please wait
Cluster auto-build Finish!
0 member(s) added successfully.
[aaa_0.Quidway-cluster]

1.3.4 build

Syntax
build name
undo build
View
Cluster view
Parameter
name: Cluster name, a string comprising up to 8 characters, which can only be
alphanumeric characters, subtraction sign (-), and underline (_).
Description
Use the build command to configure or modify the cluster name.
Use the undo build command to remove a cluster.
If the build command is executed on the candidate device, the current switch will be
configured as the management device and assigned with a cluster name.
Hops
Huawei Technologies Proprietary
1-18
Chapter 1 HGMPv2 Configuration Commands
MAC Address Device