Display Memory - Huawei Quidway S3900 series Command Manual

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
<Quidway> display fan
Unit 1
Fan 1 State: Normal
The above information indicates that fan work normally.

3.1.7 display memory

Syntax
display memory [ unit unit-id | limit ]
View
Any view
Parameter
unit-id: Unit ID of a switch.
limit: Displays the memory configuration information of the device.
Description
Use the display memory command to display the memory usage of a specified switch.
Example
# Display the memory usage of this switch.
<Quidway>display memory
Unit 1
System Available Memory(bytes): 37238784
System Used Memory(bytes): 8201352
Used Rate: 22%
Table 3-3 Description on the fields of the display memory command
System
Memory(bytes)
System Used Memory(bytes)
Used Rate
# Display the current memory configuration information of this switch.
<Quidway> display memory limit
Current memory limit configuration information:
System memory safety: 5 (Mbytes)
System memory limit: 4 (MByts)
Field
Available Available memory size of the system, in unit of
bytes
Used memory size of the system, in unit of bytes
Percentage of the used memory
Huawei Technologies Proprietary
3-5
Chapter 3 Device Management Commands
Description