Snmp-Agent Target-Host - Huawei Quidway S3900 series Command Manual

Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510
v3: SNMP V3.
all: All SNMP versions, including SNMP V1, SNMP V2C, SNMP V3.
Description
Use the snmp-agent sys-info command to configure system information such as
geographical location of the device, contact information for system maintenance and
version information of running SNMP.
Use the undo snmp-agent sys-info location command to restore the default value.
If the device fails, the device maintenance person can use contact information to
contact the manufacturer.
By default, the contact information is "R&D Beijing, Huawei Technologies Co.,Ltd.", the
system location is "Hangzhou China", the SNMP version is SNMP V3.
Related command: display snmp-agent sys-info.
Example
# Set contact information for system maintenance as Dial System Operator # 1234.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent sys-info contact Dial System Operator # 1234

1.1.18 snmp-agent target-host

Syntax
snmp-agent target-host trap address udp-domain { ip-address } [ udp-port
port-number ] params securityname security-string [ v1 | v2c | v3 [authentication |
privacy ] ]
undo snmp-agent target-host ip-address securityname security-string
View
System view
Parameter
trap: Specifies the host to be a Trap host.
address: Specifies the address of the destination host for transmitting SNMP
messages.
udp-domain: Specifies transport domain over UDP for the target host.
ip-address: The IPv4 address of the host receiving Trap packets.
port-number: Number of the port receiving Trap packets.
Huawei Technologies Proprietary
1-16
Chapter 1 SNMP Configuration Commands