File Attribute Configuration Commands; Boot Attribute-Switch - Huawei Quidway S3900 series Command Manual

Command Manual – File System Management
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 File System Management Configuration
Note:
For Ethernet switches that support IRF (intelligent resilient framework), you can input a
file path and file name in one of the following ways:
In universal resource locator (URL) format and starting with "unit[No.]>flash:/" ( [No.]
represents the unit ID of the switch). This method is used to specify a file on a
specified unit. For example, if the unit ID of the switch is 1, the URL of a file named
text.txt and residing in the root directory must be "unit1>flash:/text.txt".
In URL format and starting with "flash:/". This method can be used to specify a file in
the Flash memory of the current unit.
Inputting the path name or file name directly. This method can be used to specify a
path or a file in the current work directory.

1.1 File Attribute Configuration Commands

1.1.1 boot attribute-switch

Syntax
boot attribute-switch { all | app | configuration | web } fabric
View
User view
Parameter
all: Specifies all the files, including app files, configuration files and Web files.
app: Specifies app files.
configuration: Specifies configuration files.
web: Specifies Web files.
fabric: Applies the configuration to the whole fabric.
Chapter 1 File System Management Configuration
Commands
Huawei Technologies Proprietary
1-1
Commands