Port-Security Authorization Ignore - Huawei Quidway S3900 series Command Manual

Command Manual – Port Security & Port Binding
Quidway S3900 Series Ethernet Switches-Release 1510
# Enter Ethernet1/0/1 port view.
[Quidway] interface Ethernet1/0/1
# Set the action mode of the Intrusion Protection feature on Ethernet1/0/1 port to
disableport.
[Quidway-Ethernet1/0/1] port-security intrusion-mode disableport

1.1.6 port-security authorization ignore

Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Ethernet port view
Parameter
None
Description
Use the port-security authorization ignore command to ignore the authorization
information delivered by the RADIUS server.
Use the undo port-security authorization ignore command to restore the default.
By default, the authorization information delivered by the RADIUS server is applied on
the port
With the port-security authorization ignore command used, issuing the display
port-security interface command displays the "Authorization is ignore" message.
With the undo port-security authorization ignore command used, issuing the
display port-security interface command displays the "Authorization is permit"
message.
Example
# Configure not to apply the authorization information delivered by the RADIUS server
on the port Ethernet1/0/2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/0/2
[Quidway-Ethernet1/0/2] port-security authorization ignore
Huawei Technologies Proprietary
1-8
Chapter 1 Port Security Commands