Copy - Huawei Quidway S3900 series Command Manual

Command Manual – File System Management
Quidway S3900 Series Ethernet Switches-Release 1510
View
User view
Parameter
directory: Target directory.
Description
Use the cd command to enter a specified directory on the Ethernet switch.
The default directory is the root directory of Flash.
Example
# Enter the directory named test.
<Quidway> cd test
<Quidway> pwd
unit1>flash:/test

1.2.2 copy

Syntax
copy fileurl-source fileurl-dest
View
User view
Parameter
fileurl-source: Path name or file name of the source file in the Flash.
fileurl-dest: Path name or file name of the destination file in the Flash.
Description
Use the copy command to copy a file.
If the fileurl-dest argument identifies an existing file, the system prompts you for the
confirmation to overwrite the existing file.
Example
# Copy the file from flash:/vrpcfg.cfg into flash:/test/1.cfg.
<Quidway> copy flash:/vrpcfg.cfg flash:/test/1.cfg
Copy unit1>flash:/vrpcfg.cfg to unit1>flash:/test/1.cfg?[Y/N]:y
..
%Copy file unit1>flash:/vrpcfg.cfg to unit1>flash:/test/1.cfg...Done.
Chapter 1 File System Management Configuration
Huawei Technologies Proprietary
1-7
Commands