Peer Description - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Parameter
interface-type: Interface type
interface-number: Interface number
Description
Use the originating-rp command to allow MSDP peer to use the specified interface IP
address as the RP address in the SA message when the MSDP peer creates SA
messages.
Use the undo originating-rp command to cancel configuration.
By default, the RP address in an SA message is the RP address configured by PIM.
Example
# Configure the IP address of the interface Vlan-interface 100 as the RP address of the
created SA message.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] msdp
[Quidway-msdp] originating-rp Vlan-interface 100

7.1.10 peer description

Syntax
peer peer-address description text
undo peer peer-address description
View
MSDP view
Parameter
peer-address: IP address of the MSDP peer.
text: Description text, which is case sensitive. The maximum length is 80 characters.
Description
Use the peer description command to configure the description text for an MSDP peer.
Use the undo peer description command to delete the configured description text.
By default, an MSDP peer has no description text.
The administrator can distinguish MSDP peers by means of the description texts.
Related command: display msdp peer-status.
Huawei Technologies Proprietary
7-10
Chapter 7 MSDP Configuration Commands