Tftp Get - Huawei Quidway S3900 series Command Manual

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Display the source IP address that the TFTP client always uses to connect with a
TFTP server.
<Quidway> display tftp source-ip
The source IP you specified is 192.168.0.1
1.3.2 tftp
Syntax
tftp { ascii | binary }
View
System view
Parameter
ascii: Transfers data in the ASCII mode.
binary: Transfers data in the binary mode.
Description
Use the tftp { ascii | binary } command to set the TFTP data transfer mode.
By default, the binary mode is adopted.
Example
# Specify to adopt the ASCII mode.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] tftp ascii
TFTP transfer mode changed to ASCII.

1.3.3 tftp get

Syntax
tftp tftp-server get source-file [ dest-file ]
View
User view
Parameter
tftp-server: IP address or the host name of a TFTP server.
source-file: Name of the file to be downloaded from the TFTP server.
Huawei Technologies Proprietary
1-32
Chapter 1 FTP and TFTP