Huawei Quidway S3900 series Command Manual page 915

Command Manual – NTP
Quidway S3900 Series Ethernet Switches-Release 1510
Parameter
None
Description
Use the display ntp-service status command to display the status of NTP service.
Example
# View the status of the local NTP service.
<Quidway> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^17
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Table 1-2 Description on the fields of the display ntp-service status command
Clock status
Clock stratum
Reference clock ID
Nominal frequency
Actual frequency
Clock precision
Clock offset
Root delay
Root dispersion
Field
Local clock status
Stratum of the local clock
Address of the remote server or the ID of the
reference clock after the local system is
synchronized to a remote NTP server or a
reference clock
Nominal frequency of the local system hardware
clock
Actual frequency of the local system hardware
clock
Precision of the local system clock
Offset of the local clock with regard to the NTP
server
Roundtrip delay between the local system and
the server that serves as the primary reference
clock
The maximum dispersion of the local clock with
regard to the primary reference clock
Huawei Technologies Proprietary
1-3
Chapter 1 NTP Configuration Commands
Description