Chapter 1 Arp Configuration Commands; Arp Configuration Commands; Arp Check Enable; Arp Static - Huawei Quidway S3900 series Command Manual

Command Manual – ARP
Quidway S3900 Series Ethernet Switches-Release 1510

Chapter 1 ARP Configuration Commands

1.1 ARP Configuration Commands

1.1.1 arp check enable

Syntax
arp check enable
undo arp check enable
View
System view
Parameter
None
Description
Use the arp check enable command to enable the ARP entry checking function, that is,
to disable a switch from creating multicast MAC address ARP entries for MAC
addresses learned.
Use the undo arp check enable command to disable the ARP entry checking function.
In this case, a switch creates multicast MAC address ARP entries for MAC addresses
learned.
By default, the ARP entry checking function is enabled.
Example
# Configure to create multicast MAC address ARP entries for MAC addresses learned.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] undo arp check enable

1.1.2 arp static

Syntax
arp static ip-address mac-address [ vlan-id interface-type interface-number ]
arp static ip-address mac-address vlan-id (Ethernet interface view)
undo arp ip-address
Huawei Technologies Proprietary
1-1
Chapter 1 ARP Configuration Commands