Huawei Quidway S3900 series Command Manual page 208

Command Manual – Port Security & Port Binding
Quidway S3900 Series Ethernet Switches-Release 1510
Ethernet1/0/1 is link-down
Port mode is noRestriction
NeedtoKnow mode is needtoknowonly
Intrusion mode is disableport
Max mac-address num is 100
Stored mac-address num is 0
Authorization is permit
(Any display that follows is omitted.)
Table 1-1 Description on the fields of the display port-security command
Equipment port security is enabled
AddressLearn trap is Enabled
Intrusion trap is Enabled
Dot1x logon trap is Enabled
Dot1x logoff trap is Enabled
Dot1x logfailure trap is Enabled
RALM logon trap is Enabled
RALM logoff trap is Enabled
RALM logfailure trap is Enabled
Vlan id assigned is NULL
Disableport Timeout: 20 s
OUI value
Ethernet1/0/1 is link-down
Port mode is Userlogin
NeedtoKnow mode is disabled
Field
Huawei Technologies Proprietary
1-3
Chapter 1 Port Security Commands
Description
The port security function is enabled on
the switch.
The sending of address-learning trap
information is enabled.
The sending of intrusion-detection trap
information is enabled.
The sending of 802.1x user logon
(authentication success)
information is enabled.
The sending of 802.1x user logoff trap
information is enabled.
The sending of
authentication failure trap information is
enabled.
The sending of RALM logon trap
information is enabled.
The sending of RALM logoff trap
information is enabled.
The sending of RALM logfailure trap
information is enabled.
The delivered VLAN ID is Null.
The temporary port-disabling time is 20
seconds.
The OUI value
The link state of the port Ethernet 1/0/1
is "down".
The security mode of the port is
Userlogin.
The NTK mode is disabled.
trap
802.1x user