Vrrp Ping-Enable - Huawei Quidway S3900 series Command Manual

Command Manual – VRRP
Quidway S3900 Series Ethernet Switches-Release 1510
Parameter
real-mac: Maps the real MAC address of a Layer 3 switch routing interface to virtual
router IP addresses.
virtual-mac: Maps the virtual MAC address of a Layer 3 switch routing interface to
virtual router IP addresses.
Description
Use the vrrp method command to map the MAC address of a backup group to the
virtual router IP addresses. You can map the actual or virtual MAC address of a Layer 3
switch routing interface to virtual router IP addresses.
Use the undo vrrp method command to restore the default map settings.
By default, the virtual MAC address of a backup group is mapped to the IP address of
the virtual router.
Note that as the mapping relationship between the MAC addresses of a backup group
and a virtual router IP address cannot be configured after the backup group is created,
configure the mapping relationship before you create a backup group.
Example
# Map the real MAC address of a routing interface to a virtual router IP address.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] vrrp method real-mac

1.1.5 vrrp ping-enable

Syntax
vrrp ping-enable
undo vrrp ping-enable
View
System view
Parameter
None
Description
Use the vrrp ping-enable command to enable a backup group to respond to ping
operations destined for its virtual router IP address.
Use the undo vrrp ping-enable command to revert to the default.
Huawei Technologies Proprietary
1-5
Chapter 1 VRRP Configuration Commands