Display Local-User - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510

1.1.10 display local-user

Syntax
display local-user [ domain isp-name | idle-cut { disable | enable } | vlan vlan-id |
service-type { ftp | lan-access | ssh | telnet | terminal } | state { active | block } |
user-name user-name ]
View
Any view
Parameter
domain isp-name: Displays all local users belonging to the specified ISP domain.
Where, isp-name is the name of an ISP domain, a character string of up to 24
characters. You can only specify an existing ISP domain.
idle-cut { disable | enable }: Displays the local users who are inhibited from enabling
the idle-cut function, or the local users who are allowed to enable the idle-cut function.
Where, disable specifies the inhibited local users and enable specifies the allowed
local users.
vlan vlan-id: Displays the local users belonging to the specified VLAN. Where, vlan-id
ranges from 1 to 4094.
service-type: Displays the local users of the specified type. You can specify one of
the following user types: ftp, lan-access (generally, this type of users are Ethernet
access users, for example, 802.1x users), ssh, telnet, terminal (this type of users are
terminal users who log into the switch through the Console port).
state { active | block }: Displays the local users in the specified state. Where active
represents the users allowed to request network services, and block represents the
users inhibited to request network services.
user-name user-name: Displays the local user who has the specified user name.
Where, user-name is a character string of up to 80 characters. The string cannot
contain the following characters: /:*?<>. It can contain no more than one @ character.
The pure user name (user ID, that is, the part before @) cannot be longer than 55
characters, and the domain name (the part behind @) cannot be longer than 24
characters.
Description
Use the display local-user command to display information about specified or all
local users.
Related command: local-user.
Example
# Display information about all local users.
Huawei Technologies Proprietary
1-12
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands