Command Manual – VRRP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 VRRP Configuration Commands
Note:
The S3900-EI series switches support the VRRP feature, but not the S3900-SI series.
1.1 VRRP Configuration Commands
1.1.1 display vrrp
Syntax
display vrrp [ interface Vlan-interface valn-id | statistics [ Vlan-interface vlan-id ] ]
[ virtual-router-id ]
View
Any view
Parameter
interface: Displays VRRP information about the specified VLAN interface.
vlan-id: VLAN interface ID.
statistics: Displays VRRP statistics.
virtual-router-id: VRRP backup group ID ranging from 1 to 255.
Description
Use the display vrrp command to display the information about the VRRP state or
VRRP statistics.
When VRRP status information is displayed:
If the interface index and backup group ID are not specified, the state information
about all the backup groups on the switch is displayed.
If only the interface index is specified, the state information about all the backup
groups on the interface is displayed.
If both the interface index and backup group ID are specified, the state information
about the specified backup group on the interface is displayed.
When VRRP statistics information is displayed:
Huawei Technologies Proprietary
1-1
Chapter 1 VRRP Configuration Commands