Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Connect to the FTP server whose IP address is 192.168.8.8 through the source
interface Vlan-interface1.
<Quidway> ftp 192.168.8.8 source-interface Vlan-interface 1
1.2.14 ftp { cluster | remote-server } source-ip
Syntax
ftp { cluster | remote-server } source-ip ip-address
View
User view
Parameter
cluster: Specifies to connect to a cluster FTP server.
remote-server: IP address or host name of the FTP server.
ip-address: Source IP address.
Description
Use the ftp { cluster | remote-server } source-ip command to connect to an FTP
server through the specified source IP address. This command will fail to be executed if
the specified source IP address does not exist.
Example
# Connect to the FTP server whose IP address is 192.168.8.8 through the source IP
address 192.168.0.1.
<Quidway> ftp 192.168.8.8 source-ip 192.168.0.1
1.2.15 ftp source-interface
Syntax
ftp source-interface interface-type interface-number
undo ftp source-interface
View
System view
Parameter
interface-type: Type of the source interface.
interface-number: Number of the source interface.
Huawei Technologies Proprietary
1-17
Chapter 1 FTP and TFTP