Secondary Authorization - Huawei Quidway S3900 series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
port: Port number of the server, which is in the range of 1 to 65535 and defaults to 49.
Description
Use the secondary authentication command to configure a secondary HWTACACS
authentication server.
Use the undo secondary authentication command to delete the configured
secondary authentication server.
Note that:
You are not allowed to assign the same IP address to both primary and
secondary authentication servers; otherwise, unsuccessful operation is
prompted.
If you repeatedly use this command, the latest configuration overwrites the
previous one.
You can remove an authentication server only when it is not being used by any
active TCP connections.
Related command: display hwtacacs.
Example
# Configure a secondary authentication server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs scheme hwt1
[Quidway-hwtacacs-hwt1] secondary authentication 10.163.155.13 49

1.3.16 secondary authorization

Syntax
secondary authorization ip-address [ port ]
undo secondary authorization
View
HWTACACS scheme view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
By default, the IP address of the secondary authorization server is 0.0.0.0.
port: Port number of the server, in the range of 1 to 65535. By default, it is 49.
Huawei Technologies Proprietary
1-74
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands