Huawei Quidway S3900 series Command Manual page 851

Command Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Table 1-1 Description on the fields of the display poe interface command
Port power enabled
Port power ON/OFF
Port power status
Port power mode
Port PD class
Port power priority
Port max power
Port current power
Port average power
Port peak power
Port current
Port voltage
# Display the PoE status of all ports.
<Quidway> display poe interface
PORT INDEX
Ethernet1/0/1
Ethernet1/0/2
Ethernet1/0/3
Ethernet1/0/4
Ethernet1/0/5
Ethernet1/0/6
Ethernet1/0/7
Ethernet1/0/8
Ethernet1/0/9
Ethernet1/0/10
Ethernet1/0/11
Field
PoE is enabled on the port
The power on the port is on/off
PoE status on the port:
PoE mode on the port:
Class of power to the PD
PoE priority of the port:
The maximum available power on the port
The current power on the port
The average power on the port
The peak power on the port
The current on the port
The voltage on the port
POWER ENABLE
off disable signal
off disable signal
off disable signal
off disable signal
off disable signal
off disable signal
off disable signal
off disable signal
off disable signal
off disable signal
off disable signal
Huawei Technologies Proprietary
Chapter 1 PoE Configuration Commands
Description
user command set port to off: PoE to the port is
turned off by the user
Standard PD was detected: A standard PD is
detected
PD detection is in process: PDs are being
detected
signal: PoE through the signal cable
spare: PoE through the spare cable
critical: The highest
high: High
low: Low
MODE PRIORITY
low user command set port to off
low user command set port to off
low user command set port to off
low user command set port to off
low user command set port to off
low user command set port to off
low user command set port to off
low user command set port to off
low user command set port to off
low user command set port to off
low user command set port to off
1-2
STATUS