Info-Center Trapbuffer - Huawei Quidway S3900 series Command Manual

Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Use the undo info-center timestamp loghost command to restore the default time
stamp format.
By default, the date time stamp is adopted.
Example
# Set the no-year-date time stamp for output information sent to the log host.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center timestamp loghost no-year-date

1.1.19 info-center trapbuffer

Syntax
info-center trapbuffer [ channel { channel-number | channel-name } | size
buffersize ]*
undo info-center trapbuffer [ channel | size ]
View
System view
Parameter
size: Sets the size of the trap buffer.
buffersize: Size of the trap buffer, represented by the number of messages it holds,
ranging from 0 to 1024 and defaulting to 256.
channel: Sets the channel through which information is sent to the trap buffer.
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10
channels of the system.
channel-name: Channel name. By default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the info-center trapbuffer command to enable information output to the trap
buffer.
Use the undo info-center trapbuffer command to disable information output to the
trap buffer.
This command takes effect only after the information center function is enabled.
Related command: info-center enable and display info-center.
Huawei Technologies Proprietary
1-21
Chapter 1 Information Center Configuration
Commands