Chapter 1 Dldp Configuration Commands; Dldp Configuration Commands; Display Dldp - Huawei Quidway S3900 series Command Manual

Command Manual - DLDP
Quidway S3900 Series Ethernet Switches-Release 1510

Chapter 1 DLDP Configuration Commands

1.1 DLDP Configuration Commands

1.1.1 display dldp

Syntax
display dldp { unit-id | interface-type interface-number }
View
Any view
Parameter
unit-id: Unit number of the device.
interface-type: Port type.
interface-number: Port number.
Description
Use the display dldp command to display the DLDP configuration information of the
specified Unit or the specified port.
The configuration information includes the following:
The configuration information of the DLDP-enabled port includes the interval,
authentication mode, password, DLDP operating mode, and handling mode when
a unidirectional link is found.
The status information includes the neighbor status, local port status and link
status
The neighbor table includes the MAC address, port ID, neighbor status and aging
time items.
Example
# Display information about all the DLDP-enabled ports on Unit 1.
<Quidway> display dldp 1
dldp interval 10
dldp work-mode enhance
dldp authentication-mode none
dldp unidirectional-shutdown manual
The port number of unit 1 with DLDP is 1.
Huawei Technologies Proprietary
1-1
Chapter 1 DLDP Configuration Commands