Snmp-Agent Log - Huawei Quidway S3900 series Command Manual

Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Configure the local device name as 123456789A.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent local-engineid 123456789A

1.1.14 snmp-agent log

Syntax
snmp-agent log { set-operation | get-operation | all }
undo snmp-agent log { set-operation | get-operation | all }
View
System view
Parameter
set-operation: Logs the information about the set operation.
get-operation: Logs the information about the get operation.
all: Logs the information about the set operations.
Description
Use the snmp-agent log command to enable the logging function for network
management.
Use the undo snmp-agent log command to disable the logging function.
By default, the logging function is disabled.
Note:
In the environment of a single device, use the display logbuffer command to view
the logging information for the get and set operations sent from NMS.
In the fabric environment, use the display logbuffer command on the master
device to view the logging information for the set operation. Use the display
logbuffer command on the device that has received the get message to view the
logging information for the get operation sent from NMS.
Example
# Enable the logging function for both the get and the set operations.
<Quidway> system-view
Huawei Technologies Proprietary
1-13
Chapter 1 SNMP Configuration Commands