Display Link-Aggregation Verbose - Huawei Quidway S3900 series Command Manual

Command Manual – Link Aggregation
Quidway S3900 Series Ethernet Switches-Release 1510
Field
Master Port

1.1.3 display link-aggregation verbose

Syntax
display link-aggregation verbose [ agg-id ]
View
Any view
Parameter
agg-id: Aggregation group ID, which ranges from 1 to 416 and must be the ID of an
existing aggregation group.
Description
Use the display link-aggregation verbose command to display the details about a
specified aggregation group, including:
Aggregation group ID, aggregation group type, load sharing type, aggregation
group description string, and device ID;
Local end details: local port, port status, port priority, operation key and protocol
status flag;
Remote end details: local port, remote port index, remote port priority, operation
key, device ID and protocol status flag.
Note that, for a manual aggregation group, value 0 is displayed for all the above items
of the remote end (which does not indicate the real information of the remote end),
since information about the remote end cannot be obtained for a manual aggregation
group.
Example
# Display the details about aggregation group 1.
<Quidway> display link-aggregation verbose 1
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Flags: A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation ID: 1, AggregationType: Static,
Aggregation Description: abc
Number of the master port
Huawei Technologies Proprietary
1-4
Chapter 1 Link Aggregation Configuration
Description
Loadsharing Type: NonS
Commands