Chapter 1 Igmp Snooping Configuration Commands; Igmp Snooping Configuration Commands; Display Igmp-Snooping Configuration - Huawei Quidway S3900 series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 IGMP Snooping Configuration
Note:
The multicast protocol supported by S3900-SI series Ethernet switches is IGMP
Snooping only.
Ethernet switches serve as routers when an IP multicast protocol is running on it.
The routers mentioned here refer to common routers and Layer 3 Ethernet switches
where the IP multicast protocol is running.

1.1 IGMP Snooping Configuration Commands

1.1.1 display igmp-snooping configuration

Syntax
display igmp-snooping configuration
View
Any view
Parameter
None
Description
Use the display igmp-snooping configuration command to display IGMP Snooping
configuration information.
When IGMP Snooping is enabled on the switch, this command displays the following
information: IGMP Snooping status, aging time of the router port, query response
timeout time, and aging time of multicast member ports.
Related command: igmp-snooping.
Example
# Display IGMP Snooping configuration information on the switch.
<Quidway> display igmp-snooping configuration
Commands
Huawei Technologies Proprietary
1-1
Chapter 1 IGMP Snooping Configuration
Commands